Why I Need for Tune up Honda 2017 Accord- A tune-up for your 2017 Honda Accord is all about keeping your car running smoothly and preventing potential problems down the road. Here’s what you’ll need and the steps
Tools and Supplies You’ll Need:
- Basic Tools:
- Socket wrench set
- Screwdrivers (flathead and Phillips)
- Torque wrench (optional, but helpful)
- Pliers
- Jack and stands (if needed for undercarriage work)
- Parts and Fluids:
- Spark Plugs: Replace them with high-quality plugs recommended for your Accord.
- Engine Air Filter: Check if it’s dirty and replace it if needed.
- Cabin Air Filter: Keeps the air inside fresh and clean.
- Motor Oil: Use the recommended grade for your Accord (likely 0W-20 full synthetic).
- Oil Filter: Replace it along with the oil.
- Fuel System Cleaner: Helps clean fuel injectors and improve efficiency.
- Coolant/Antifreeze: Top up or flush if it hasn’t been done recently.
- Transmission Fluid: Replace if it’s due (consult the maintenance schedule).
- Brake Fluid: Top off or replace if it’s been over two years.
- Windshield Washer Fluid: Keep it full for clear visibility.
- Other Essentials:
- Shop towels or rags
- Funnel for pouring fluids
- A drain pan for oil changes
- Gloves and safety glasses
Why I Need for Tune up Honda 2017 Accord
Tune-Up Checklist:
1. Change the Spark Plugs
- Locate the spark plugs using your car’s manual.
- Remove the old ones and install new plugs, tightening them to the recommended torque.
2. Replace the Engine Air Filter
- Check the filter housing under the hood. If the filter looks dirty, swap it out for a new one.
3. Change the Cabin Air Filter
- Access it behind the glove box (most models). Replace it if it’s clogged or dirty.
4. Perform an Oil and Oil Filter Change
- Drain the old oil, replace the oil filter, and refill with fresh oil.
5. Check and Top Off Fluids
- Inspect and refill:
- Coolant
- Brake fluid
- Power steering fluid (if applicable)
- Windshield washer fluid
6. Inspect Belts and Hoses
- Look for cracks, wear, or leaks in belts and hoses. Replace if needed.
7. Clean the Throttle Body
- Use throttle body cleaner to remove carbon buildup for smoother acceleration.
8. Fuel System Maintenance
- Add a fuel injector cleaner to the gas tank during your next fill-up.
9. Inspect the Battery
- Clean the terminals and check the voltage. Replace the battery if it’s over 3–5 years old or struggling to hold a charge.
10. Check Tires and Brakes
- Rotate the tires if needed and inspect their tread and pressure.
- Check the brake pads and rotors for wear.